how to properly disconnect and reconnect a car battery

Use your socket wrench or adjustable wrench to loosen the nut holding the cable onto the negative battery terminal. Check that the keys are out of the ignition and the ignition is not in the start position.

How To Safely Disconnect Car Battery Rx Mechanic

Here are some tips to help you through the process.

. Turn off the cars ignition. And if you know how to do that you might be able to save a few bucks. 1Find A Suitable Tool.

If you directly remove the battery while the terminal is connected there may be sparks and the battery will immediately explode. Know the right tools to connect a car battery. Use a wrench to loosen the bolt of the negative battery cable.

The terminals will be marked positive and negative. Keep the door open it could lock up when the battery terminal is replaced depending on the type of your car. Place the battery in the battery tray.

Disconnect the negative terminal of the battery first. Ensure that your car is in park position If you are using automatic transmission. Now youre ready to start your car.

Apply grease to the terminals. You can use an old fashioned jumper cable or an automotive-grade one but make sure that it has enough current capacity for your cars battery pack. Loosen the bolt on the positive terminal the one with the plus symbol lift it off the terminal and place it away from the battery where it.

Determine Positive and Negative Battery Terminals. Remove them and it will allow you to get the battery disconnected from the negative terminal. All thats left now youve reconnected the battery is to replace any battery covers you removed at the beginning and then close your bonnet.

Turn off the ignition apply safety procedures. In this video you will learn how to connect and disconnect a carmarinerv battery safelyBelow are some links to Amazon for the items in this video. Instead use a pair of plyers or a terminal puller to apply upwards pressure until it releases.

Start By Turning The Ignition Off. Once the negative terminal is. Make sure you disconnect the negative terminal first.

Most car battery terminals have positive and negative posts and the posts should be connected to the positive and negative posts on the battery. 1 Tools You Need to Connect a Car Battery. Once its loosened twist and pull up on the cable.

The best way to reconnect a car battery is with a good tool. Disconnect the Battery Cables. This will help prevent any accidental sparks.

Disconnecting A Car Battery. If it doesnt come off easily dont try to pry it off as this could damage the terminal. Tips to Reconnect a Car Battery.

Loosen The Nut On The Negative Terminal With A Wrench. In this video I tell you the proper order for connecting and disconnecting car battery terminals. The car is an 84 crossfire vette.

You are simply starting the electrical circuit again in the car. To disconnect car battery properly you need to first unscrew the nuts that hold the terminal in the proper place. 2Check Whether The Terminal Is Corrode.

A step-by-step walk-through of how to disconnect your cars battery follows. It goes without saying that it is vital to turn off the car before you attempt to disconnect the cars battery. Youll need a socket wrench set and a Phillips head screwdriver.

Hines recommends connecting the battery to the car in the reverse order you disconnected the old one. Remove The Battery If Necessary. Hopefully the electrical work youve carried out has been a success.

Technically you can connectdisconnect the terminals in w. Make sure you have the right tools. 2 Process of Reconnecting a Car Battery.

What is the proper way to disconnect a car battery. Find Your Car Batterys Negative Terminal. Follow the handling and safety procedures.

After the battery has been secured into the car you can begin the reconnection process. The first thing that you should do is disconnect the battery cables from the terminals on your car battery and then connect them to a jumper cable. Cover the battery and close the bonnet.

Before you disconnect the battery from the engine turn off the ignition key first and retrieve the key. Remove The Negative Connector Then Repeat With The Positive Terminal. Put on safety goggles and work gloves if possible to protect yourself while you disconnect the battery from your car.

How To Disconnect A Car Battery 7 Easy Steps